GPU financing explained

GPU financing explained

A clear guide to how lenders finance the hardware behind AI: who borrows, what lenders look for, how deals are priced and structured, and why the debate over chip depreciation shapes the terms.

Key terms

  • Operator (or neocloud): a company that buys GPU clusters and sells computing capacity to others.
  • Offtaker: the customer that has agreed to buy that capacity.
  • Offtake contract: the agreement under which the offtaker commits to buy capacity for a set term and price.
  • Advance rate: the share of the hardware cost a lender will finance.
  • Residual value: what the hardware is worth at the end of the loan.
  • Take-or-pay: a clause requiring the customer to pay whether or not it uses the capacity.
  • Project company: a company set up solely to hold the hardware and the contract, sometimes called a special purpose vehicle (SPV).

1. The basics

What is GPU financing? GPU financing is debt used to buy the graphics processing units (GPUs) and servers that run AI workloads. It is repaid from the income the hardware earns. The lender takes security over the hardware and, in most cases, over the contract the operator has signed to sell its computing capacity. The loan covers most of the purchase price, and the operator or its customer funds the remainder.

Who borrows this way? Mainly specialist compute providers, often called neoclouds, which buy GPU clusters and sell capacity to AI companies, businesses and governments. Large companies building their own AI capacity and data centre operators adding computing power to existing sites also borrow in this way. What they share is a large hardware purchase that must be made before any revenue is generated.

Why not use equity? A GPU cluster has a known cost and, usually, contracted income attached to it. Equity is priced on the value of the whole company and its future, which makes it an expensive way to fund an asset that will be paid off within three to five years from money a named customer has already agreed to pay. Debt funds the hardware without diluting existing shareholders.

Is it a loan or a lease? Both are available. With a loan or a finance lease, the operator owns the hardware once the payments are complete. With an operating lease, the lessor retains ownership. Payments are lower, and at the end of the term the operator can return the hardware, extend the lease or buy it. The choice usually depends on how much cash the operator can contribute at the outset and whether it wants to keep the hardware after the contract ends.

2. Qualifying for finance

Do I need a signed customer contract? In almost all cases, yes. It is the single biggest factor in whether a deal proceeds and at what price. Because the hardware’s future value is uncertain, lenders place a conservative value on it, and what they are really lending against is the customer’s commitment to buy the capacity. The contract’s length, the customer’s right to cancel and the customer’s credit quality matter more than which chip is being financed.

What if I do not yet have a contract? This is the problem most new operators face. Customers want to see hardware installed and running before they commit to a long contract, while lenders want the contract in place before they fund the hardware. The usual solutions are:

  • a larger equity contribution
  • a firm letter of intent that a lender can rely on
  • a smaller first cluster financed on less favourable terms
  • an upfront payment from the customer that covers part of the purchase

How much do I need to contribute? Typically 20–30% of the hardware cost, based on indicative terms published in the market, with the remainder financed. The contribution can come from the operator, its investors or an upfront payment from the customer. Without an offtake contract, the amount required rises significantly.

What will lenders ask to see?

  • Corporate documents, financial statements and a financial model for the project
  • The signed offtake contract or letter of intent, showing its term, volume and price
  • The bill of materials or supplier quote for the hardware
  • The colocation quote, covering power, cooling, space and cost
  • Evidence of available cash

Some lenders, such as SLYD, also ask for a deployment schedule and details of the jurisdiction.

How long does it take? Around 30 days from a complete application to completion is the market norm. In practice, most delays result from missing documents rather than credit analysis, which is why lenders publish checklists at the outset.

3. Terms and pricing

What interest rate should I expect? Pricing follows the customer more than the hardware. Indicative terms published by American Compute range from 7–10% a year where the customer is investment grade, to 10–12% for a strong corporate customer and 12–15% where the customer has weaker credit or the contract is not yet signed, even when the hardware is identical. Smaller facilities usually carry a fixed rate. Larger ones are often floating, set at a margin over a benchmark such as SOFR.

How much of the cost will a lender finance? Commonly 50–80%, depending on the strength of the offtake contract and the borrower’s own credit. Larger, well-contracted deals sit at the top of the range. Where the customer makes a substantial upfront payment, that payment acts as the equity and the loan covers the remainder.

How long is the loan? Usually as long as the customer contract. For a newer operator, this typically means two to three years. If the contract runs for five years, the financing can match it. The guiding principle is that the loan should be repaid from contracted income before the hardware’s resale value comes into question.

What security does the lender take?

  • A first-ranking charge over the hardware and networking equipment
  • A charge over the shares in the project company
  • An assignment of the offtake contract and the payments due under it

Most structures also route the customer’s payments into an account the lender controls, and hold a reserve, commonly three months of payments, funded at the outset.

Are there covenants? Usually a debt service coverage test, commonly set at 1.15–1.25 times. This means the project must generate 15–25% more cash than it needs to meet its loan payments. Recourse is often limited to the project company, with the parent guaranteeing only against fraud and similar misconduct. Larger transactions may require a full parent guarantee.

4. Risk and depreciation

How quickly do GPUs lose value? There is no consensus, and the disagreement is visible in the accounts of the companies that own the most. From 1 January 2025, Amazon shortened the assumed working life of some servers and networking equipment from six years to five, adding about $1.4 billion to its depreciation charge for the year. Meta moved in the opposite direction, extending most of its servers to five and a half years and reducing its charge by $2.92 billion.

Do older chips still generate revenue? Yes. CoreWeave told investors in August that A100 chips, launched in 2020, were still generating revenue, with some contracts running to 2029. As AI training moves to newer hardware, older chips are redeployed to less demanding work such as inference. However, rental income and resale value are different matters, and a lender that has to recover its money by selling the hardware is concerned with the latter.

Why does this matter for my financing? It shapes how a deal is structured more than how it is priced. A lender that cannot rely on resale value will match repayments to the contract, take ownership of the hardware, control where payments go and hold a reserve. These features make the hardware’s residual value a last line of defence rather than the basis of the loan.

Who owns the hardware during the loan? With a standard loan, the operator owns it, subject to the lender’s charge. In some structures the lender buys the hardware directly from the supplier and holds title until the loan is repaid, at which point ownership passes to the operator. Under an operating lease, the lessor owns it throughout. The legal documents determine which applies, and the difference affects both the accounting treatment and what happens if the borrower defaults.

What happens if the customer stops paying? This is what take-or-pay terms, controlled accounts and direct agreements are designed for. A take-or-pay clause means the customer pays whether or not it uses the capacity. A direct agreement is signed by the customer and confirms that it pays into the lender’s account and that the lender can step in if required. Without these protections, a contract may not convert into cash when it is needed.

5. Financing with Liquidity

What does Liquidity offer? We provide facilities from $100 million against contracted compute, structured so that repayments follow the customer contract rather than the hardware’s depreciation schedule. We have already structured a hardware financing on this basis for a server operator supplying capacity to a global hyperscaler. We lend across North America, Europe, Asia-Pacific and the Middle East and North Africa (MENA).

What do you assess? Both the operator and its customer, because the customer’s credit often matters as much as the borrower’s. Our platform analyses more than 1.5 million data points across 140,000 public and private companies. We reassess both parties throughout the life of the facility, not only at completion, so we identify any deterioration at the customer before it affects repayments.

How quickly can you move? A term sheet within 72 hours and completion within 30 days, provided the documents are complete. The speed comes from continuous underwriting, not lighter due diligence.

Who should get in touch? Compute operators with a signed contract or a firm letter of intent, data centre operators adding capacity and companies building their own AI infrastructure. If your contract is not yet signed, it is still worth speaking to us: the structure that makes a deal work is often agreed before the contract is.

Liquidity invests in visionary growth and mid-market companies around the world, deploying from $10 million to $200 million in flexible capital designed to scale in step with vision and ambition.